EP2008-000x | 8-channel digital output 24 V DC, IMAX = 0.5 A

The EP2008 EtherCAT Box with digital outputs connects binary control signals from the controller on to the actuators at the process level. The eight outputs handle load currents of up to 0.5 A and indicate their status through light emitting diodes. The signals are optionally connected via M8 (EP2008-0001) or M12 (EP2008-0002) screw type connectors. The outputs are short-circuit-proof and protected against inverse connection.

Technical data	EP2008-0001	EP2008-0002
Number of outputs	8
Output connections	M8, screw type	M12, screw type
Protocol	EtherCAT
Bus interface	2 x M8, shielded, screw type
Load type	ohmic, inductive, lamp load
Nominal output voltage	24 V DC (-15 %/+20 %)
Max. output current	0.5 A (short-circuit-proof) per channel
Short circuit current	typ. 1.5 A
Distributed clocks	–
Auxiliary power current	typ. 20 mA + load
Current consumption from US (without sensor current)	120 mA
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	8 outputs
Electrical isolation	500 V
Weight	approx. 165 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable
Approvals	CE, UL, Ex