EP2038-000x | 8-channel digital output 24 V DC, IMAX = 2 A (∑ 4 A), with diagnostics

The EP2038 EtherCAT Box with digital outputs connects binary control signals from the controller on to the actuators at the process level. The eight outputs handle load currents of up to 2 A each, although the total current is limited to 4 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 2 A signal current.

The signal state is indicated by means of light emitting diodes. The EP2038 offers output diagnostics in the form of short circuit and open circuit detection per channel. The signals are optionally connected via M8 (EP2038-0001) or M12 (EP2038-0002) screw type connectors.

Technical data	EP2038-0001	EP2038-0002
Number of outputs	8
Output connections	M8, screw type	M12, screw type
Protocol	EtherCAT
Bus interface	2 x M8, shielded, screw type
Load type	ohmic, inductive, lamp load
Nominal output voltage	24 V DC (-15 %/+20 %)
Max. output current	2.0 A (short-circuit-proof) per channel
Short circuit current	max. 7 A
Distributed clocks	–
Auxiliary power current	typ. 20 mA + load
Current consumption from US (without sensor current)	120 mA
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	8 outputs + 8 diagnostic inputs
Electrical isolation	500 V
Weight	approx. 165 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable