EP2339-002x | 16-channel digital input or output 24 V DC, freely configurable

The EP2339 EtherCAT Box has 16 freely configurable digital inputs or outputs in one device. A filter constant of 3.0 ms is available for the inputs. The outputs are short-circuit-proof and protected against inverse polarity. They handle load currents of up to 0.5 A each, although the total current is limited to 4 A. The state of each signal is indicated by means of light emitting diodes. The signals are connected optionally via M8 (EP2339-0021) or M12 (EP2339-0022) screw type connectors. The sensors are powered by the load voltage UP.

Technical data	EP2339-0021	EP2339-0022
Specification	EN 61131-2, type 1/3
Number of channels	16 digital inputs or outputs, freely configurable
Input/output connections	M8, screw type	M12, screw type
Protocol	EtherCAT
Bus interface	2 x M8, shielded, screw type
Input filter	3.0 ms
“0“ signal voltage	-3…+5 V
“1“ signal voltage	11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply	derived from load supply voltage, max. 0.5 A total, short-circuit-proof
Load type	ohmic, inductive, lamp load
Rated load voltage	24 V DC (-15 %/+20 %)
Max. output current	0.5 A each channel, individually short-circuit-proof, total current max. 4 A
Short circuit current	typ. 1.5 A
Auxiliary power current	typ. 20 mA + load
Current consumption from US (without sensor current)	120 mA
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	16 inputs + 16 outputs
Electrical isolation	500 V
Special features	freely configurable inputs or outputs
Weight	approx. 250 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable