Press Release

11th April 2010
Beckhoff Building Automation: PC-based automation as the basis for energy-efficient buildings
Energy monitoring: from the Bus Terminal
to the ERP system

Investors and planners are faced with the challenge of coming to grips with energy costs without making cuts in the comfort of a building. The basis for this is the control and measurement of the energy consumption of individual systems. PC-based automation offers the ideal solution for the acquisition of energy and consumption data as an integral component of intelligent building automation. The energy consumption for current, water, gas or heating is recorded directly in the Beckhoff Bus Terminal system.

In addition to building automation functions, Beckhoff PC-based control technology also offers the basic data acquisition technology for energy:

  • local signal acquisition via the Bus Terminal I/O system
  • data transmission via Ethernet or other bus systems 
  • evaluation in the Industrial PC via TwinCAT automation software
  • provision of the energy data via standardized interfaces (e.g. OPC) to higher-level systems of the building and data management

 

The seamless integration of the energy and consumption data acquisition for all systems in the automation system results in savings potentials and synergies, both in the system installation and in the further operation of the building. The measured data are transferred to the control center via open interfaces and analyzed by the building management system. On the basis of comprehensive statistics and analysis functions, the building operator can recognize weak points and initiate targeted improvement measures. The available data pool also enables exact accounting and billing of consumption.

Energy consumption measurement via Bus Terminals

In addition to the standard terminals, the Beckhoff Bus Terminal system also offers numerous I/Os for measurement applications:

  • acquisition of current consumption via the power measurement terminal (KL3403) and/or the digital multimeter terminal (KL3681)
  • acquisition of water, gas and heat consumption via M-bus (KL6001/KL6021 serial interfaces with level converter)
  • temperature measurement, e.g. via the KL3228 8-channel resistance measuring terminal
  • pressure measurement or the detection of leaks in the compressed air supply (KM3702)

 

Using TwinCAT automation software, the measured data are processed further, and switching and regulating actions may be implemented immediately; alternatively, communication with the command level is established.

The energy data are made available via defined software interfaces, such as OPC, to the higher-level energy management software or the building management, where they are evaluated or analyzed. The measured data can additionally be assigned to certain cost centers, for example by connecting to an ERP system.
Using the “TwinCAT Scope 2” software oscilloscope, curves can be displayed graphically with a resolution on the order of microseconds.

www.beckhoff.com/building

Press picture

  • Acquisition of consumption data of a building takes place directly in the Beckhoff Bus Terminal system: e.g. via energy measurement terminals or the M-Bus communication terminal.

    Picture caption:

    Acquisition of consumption data of a building takes place directly in the Beckhoff Bus Terminal system: e.g. via energy measurement terminals or the M-Bus communication terminal.

Download:

Download Presskit (ZIP)

Further information:

Bus Terminal

TwinCAT

Back to overview